Wildland Fire

Fire intelligence when the incident needs it.

Night infrared mapping, hotspot detection, and perimeter products delivered to the incident management team the same shift.

What we deliver

The same package every shift

Same package every shift, in the formats the incident already uses.

  • Heat perimeter, intense and scattered heat, and isolated heat points classed high, medium, and low, in the NIFS schema the incident's GIS specialist, the GISS, expects, carrying the IRWIN identifier
  • Mopup buffers at whatever distance the IC and operations set, 50 to 400 feet off the line depending on the fire, so heat inside the buffer reads as a task with an edge on it
  • Templated 11 by 17 map sheets, aerial and topo pairs, both operator logos, with a QR to the live data
  • File geodatabase and shapefile set, KMZ for Avenza, TAK, FireSync, and Field Maps, orthorectified IR GeoTIFF
  • UAS IR flight summary: aircraft, sensor, pilot, times, coverage, interpreted size, method
  • Hosted feature service the crew opens in Field Maps, Avenza, TAK, or FireSync at 0700
Templated 11 by 17 infrared map sheet for Fielder Mountain, August 2026: heat perimeter, classified heat, mopup buffer, both operator logos, scale bar, and QR code.
The 11 by 17 as it ships. Fielder Mountain, August 2026: heat perimeter, classified heat, mopup buffer, both operator logos, scale, and the QR to the live data.
Infrared map sheet for Woodrat Mountain on a topographic base: heat perimeter, intense and scattered heat, isolated heat sources, and the launch and recovery point.
Heat perimeter, intense and scattered heat, and isolated heat sources on the topo base, with the launch and recovery point marked.
Field Maps on a phone showing hundreds of classified heat points along a fire perimeter at East Evans Creek.
The KMZ on a phone in a field mapping app, sized for a phone in a truck.
The aircraft on its landing pad at night, lit by headlamp, with the truck lights glowing behind.

Why a firefighter's drone company

This work comes from the fire side

Red carded, on the fire line since 2012, and an ODF Call When Needed resource since 2019. Certificate of Authorization experience in controlled airspace. We carry the incident tactical and air to air frequencies, deconflict with the ARTCC, and operate inside the TFR under 14 CFR 91.137 rather than around it.

The pipeline that turns a pilot's raw thermal export into an incident ready package in about five minutes was designed and built here, then handed to the UAS Wildland Fire Collaborative so every pilot on a fire can hand the incident the same packet. Work for the Collaborative goes through uaswfc.org. Every map on this page is a Rogue Reconnaissance job.

  • FAA Part 107 remote pilot, certificated November 2016
  • Red carded wildland firefighter: FFT1, GISS, UASD
  • Administratively Determined resource, US Forest Service
  • Oregon Department of Forestry Call When Needed UAS resource since 2019
  • Certificate of Authorization holder, Class D and Class E2 airspace
  • SAM.gov registered federal contractor, UEI RUE6PBWSLAN6, CAGE 9DDE5
  • Insured remote pilots
  • Founder, UAS Wildland Fire Collaborative, a 501(c)(3)

How a shift works

When the aircraft leave for the night, we go to work

Flying at night is safer, the airspace is quiet, and heat signatures read cleaner against cooled ground.

  1. The Matrice 300 launching from the rooftop tent of the truck at night, headlamp lit trees behind it.
    01

    Mobilize under Call When Needed

    Resource order in hand, we coordinate with air operations, the IC, division supervisors, and the ARTCC before dark, and put the launch and recovery point in the layer.

  2. A hand holding the remote controller with the thermal image on screen, standing in the burned forest.
    02

    Fly the night shift

    After the incident’s aircraft leave for the night we grid the division with a radiometric thermal camera, as a mapping mission, typically 1300 to 0800.

  3. Processing workstation in the back of the truck: laptop, hard cases, helmet, and radios, with the valley behind.
    03

    Process in the field

    The imagery becomes an orthorectified thermal mosaic and heat is classified from measured temperature. The package builds in about five minutes.

  4. The infrared map on the laptop in the back of the truck at night, ready to deliver before briefing.
    04

    Deliver before briefing

    Map sheets, geodatabase, shapefiles, KMZ, and the flight summary go to the GISS and the IMT before the morning briefing, most nights by 0500.

Thermal map of a prescribed burn unit laid over the color imagery, hot spots marked across the unit.
Thermal map of a prescribed burn unit, one of the first products, years before the pipeline.

Who it is for

Fires that never get a crewed infrared flight

  • State agencies under Call When Needed agreements
  • Type 3 incidents and initial attack, where the first perimeter product comes off a tailgate
  • Prescribed fire planning, ignition documentation, and mortality mapping afterward
  • Post fire assessment for the mitigation work that follows

Smoke and inversion ground most aircraft. We can usually see through the inversion or fly under it, so the mapping still happens on the nights other platforms cannot fly at all.

Watch

Tyee Ridge Complex, 2023

Video

Tyee Ridge Complex UAS infrared mapping

ArcGIS StoryMap

Wildland fire mapping StoryMap

The sensors and methods behind this lane:

Let's talk about your fire season.